Pool Deck Resurfacing in Alpharetta, GA
A typical pool deck resurfacing project in Alpharetta looks like this: roughly 550 square feet of weathered, cracked concrete transformed into a slip-resistant, UV-stable flake-finished surface in a single day using a polyurea base coat with a polyaspartic top coat. The crew arrives in the morning, completes diamond grinding, crack repair, base coat, full flake broadcast, and final top coat by mid-afternoon. The deck is walkable that evening and the pool is back open the next day.
This is the kind of project Revolution Flooring completes across Alpharetta and the surrounding North Atlanta area through swim season and into fall.
Project Snapshot
Detail | Specification |
Location | Alpharetta, GA |
Deck Size | ~550 sq ft (mid-size residential pool deck) |
System Installed | Penntek polyurea base + polyaspartic top coat |
Finish | Full flake broadcast with light tan and gray blend |
Install Time | 1 day |
Walkable | Same evening |
Pool Reopens | 24 to 48 hours after install |
Warranty | Penntek lifetime materials + workmanship coverage |
The Starting Point
A typical Alpharetta pool deck is 10 to 25 years old, gets full sun for most of the day, and has been hit with chlorine, salt, sunscreen, and Georgia summer thunderstorms year after year. The starting condition usually includes:
- Hairline and structural cracks running across the deck and along the coping
- Surface pitting and spalling near the pool edge
- Dull, faded color from UV exposure
- Algae stains, chlorine bleach spots, and water rings
- Worn or failed expansion joints
- Slippery spots where the surface texture has worn smooth
- Areas where old sealers or paint coatings have peeled away
A full tear-out and re-pour would mean weeks of pool downtime and a five-figure price tag. Resurfacing with a polyurea-polyaspartic system gets you a brand-new deck surface in a single day at a fraction of that cost.
pool deck resurfacing in Alpharetta GA The Process Step by Step
A pool deck resurfacing in Alpharetta follows the same 1-day process used on garage floors, with extra attention to slip resistance and pool edge masking.
Step 1: Site Prep and Moisture Testing (Early Morning
The crew clears the deck area, moves furniture, masks off the pool coping, masks the home exterior and any adjacent finished surfaces, and tests slab moisture. Moisture readings determine whether a 1-day install is appropriate or whether a moisture-mitigating primer is needed first.
Step 2: Diamond Grinding
HEPA-vacuumed industrial diamond grinders profile the entire deck surface. This removes failed sealers, surface contamination, algae stains, and worn texture, opening the concrete pores so the polyurea base coat bonds aggressively. Dust stays controlled and out of the pool.
Step 3: Crack and Joint Repair
Cracks, spalls, pitting around the pool edge, and worn expansion joints are filled with a fast-curing structural repair compound. Repairs are ground flush so the finished coating reads as one seamless surface.
Step 4: Polyurea Base Coat
A high-strength polyurea base coat is rolled across the entire deck. Polyurea penetrates the prepared concrete, stays flexible through seasonal slab movement, and creates the moisture-resistant structural foundation of the system.
Step 5: Full Flake Broadcast to Rejection
Decorative flakes are hand-broadcast into the wet base coat until the deck can no longer hold any more. For pool decks, this “to rejection” application is critical because it creates the slip-resistant texture you need around water, hides imperfections in the underlying slab, and locks in the finished look. Color blends are selected from the color chart before install day. See the full flake broadcast system for more on this finish style.
Step 6: Flake Scraping and Cleanup
After the base coat sets enough to hold the flakes, excess loose chips are scraped off and vacuumed. The surface is leveled and primed for the top coat.
Step 7: Polyaspartic Top Coat
A clear aliphatic polyaspartic top coat is rolled across the deck. This is the layer that delivers UV stability, chlorine and salt resistance, scratch resistance, and the slip-resistant texture. Polyaspartic cures fast enough to leave the deck walkable within hours.
Step 8: Final Walkthrough
Coverage and finish quality are inspected. The homeowner gets handoff instructions for cure timing, when the pool can reopen, and how to maintain the surface long term.
The crew is usually packed up by mid-afternoon, well before the typical North Georgia summer thunderstorm rolls in.
The Finished Result
When the homeowner walks back onto the deck that evening, the slab looks completely different from the cracked, faded concrete from that morning. A typical finished pool deck resurfacing project in Alpharetta delivers:
- A seamless, slip-resistant flake surface that wraps the entire deck
- A textured top coat that stays safe underfoot when wet
- A finish that resists chlorine, salt, sunscreen, and pool chemicals
- Lighter colors that stay noticeably cooler underfoot than bare concrete
- A surface that wipes clean with water and mild soap
- A finish built to hold its color through 15+ Georgia summers
- No more cracks, pitting, algae stains, or worn smooth spots
A polyurea-polyaspartic pool deck resurfacing project turns a 20-year-old cracked slab into a finished outdoor surface that looks brand new and holds up through Georgia summer after Georgia summer.
Why a Polyurea Polyaspartic System Works for Alpharetta Pool Decks
Alpharetta pool decks deal with a harsh mix of conditions: full sun for hours each day, summer slab temperatures over 130°F, chlorinated or salt water splashing all season, sunscreen and lotion residue, foot traffic, pollen, and thunderstorms. Most coatings fail in this environment within 2 to 5 years.
A polyurea base coat handles the structural side. It bonds deeper than epoxy, stays flexible as the slab expands and contracts through seasonal swings, and resists moisture from below and above.
A polyaspartic top coat handles the surface side. Because polyaspartic is built with aliphatic chemistry, it does not absorb UV light the way epoxy and most polyureas do, which is why it does not yellow or fade through year after year of sun exposure. For more on this, see our guide to polyaspartic UV resistance in Georgia sun.
Together, the two-coat Penntek system handles UV, chlorine, salt, abrasion, and slab movement in one finish. This is the standard professional installers use across North Atlanta for pool decks.
What This Type of Project Costs in Alpharetta
A pool deck resurfacing project in Alpharetta with a polyurea base coat, full flake broadcast, and polyaspartic top coat typically runs $8 to $14 per square foot installed. For a 500 to 700 square foot pool deck, that puts most projects in the $4,000 to $9,800 range, depending on slab condition, square footage, finish choices, and whether coping or stem walls are coated.
Most standard residential pool decks in this area fall between $5,500 and $7,500 for the full polyurea-polyaspartic flake system. Resurfacing this way costs roughly 30 to 50 percent less than a full tear-out and re-pour, with a 1-day install instead of weeks of pool downtime.
For more on summer installs and what to expect, see our guide to pool deck coating in summer in Georgia.
Ready for a Pool Deck Transformation in Alpharetta
If your Alpharetta pool deck is cracked, faded, slippery, or showing its age, the right system can transform it in a single day with a finish built to handle Georgia heat, chlorine, and UV for the next 15 to 20 years.
Call Revolution Flooring for an on-site estimate. We are an authorized Penntek dealer, and every install is backed by a Penntek lifetime materials warranty plus a written workmanship warranty.
We install premium polyurea and polyaspartic pool deck coatings across Alpharetta, Roswell, Milton, Johns Creek, Cumming, Marietta, Woodstock, Sandy Springs, Canton, Kennesaw, and nearby areas throughout North Atlanta and Northwest Georgia. Most installs finish in a single day with the pool back open the next day.
Request your estimate online or call 770-709-8497 today.